Innovative Edge Function
Edge Function works in a similar way to regular floor-mounted EAS antennas, but it just requires a tiny cubed Hub to be installed above or near the store exit. The system is simple to install, takes up no space at all, and can be up and running in minutes.
If a tagged product is taken too close to the antenna then it will ALARM.
Each antenna emits a signal of up to 3.5m radius and this can be adjusted to suit your environment using a simple dial on the side of the antenna. If your exit is wider than 3m then simply add more antennas to expand the width. You just need to ensure the signal from each antenna overlaps.
How the Edge Function Works
The edge function system consists of 3 key components:
The Deactivator
Deactivates the Tags
The system includes a small Deactivator that deactivates the Tags, allowing them to be removed from the product. This small device can either sit on top or underneath your counter.
The Tags
To protect the products
The system includes a small Deactivator that deactivates the Tags, allowing them to be removed from the product. This small device can either sit on top or underneath your counter.
The Antenna
Each antenna emits a signal of up to 3m radius and this can be adjusted to suit your environment using a simple dial on the side of the antenna. If your exit is wider than 3m then simply add more antennas to expand the width. You just need to ensure the signal from each antenna overlaps.
The antenna is very easy to install and only requires a 240v power socket nearby. Unlike regular EAS systems there are no gates, just this small antenna.
